MPO - MPO Trunk Cables Including New Pull Tab
DINTEK Light-LINKSTM MPO trunk cables create an ideal route for information within the main distribution area (MDA) and zone distribution areas of the Data Centre.
With high performance and ingrained simplicity our Light-LINKSTM low-loss MPO Trunks are the foundation of simpler, faster and superior pre-terminated fiber connectivity solutions supporting the data center.
| MPO - MPO OM3 Trunk Cables Including Pull Tab |  |
DINTEK Light-LINKSTM MPO trunk cables create an ideal route for information within the main distribution area (MDA) and zone distribution areas of the Data Centre.
With high performance and ingrained simplicity our Light-LINKSTM low-loss MPO Trunks are the foundation of simpler, faster and superior pre-terminated fiber connectivity solutions supporting the data center.
Features
- Eliminates the cost of field-termination.
- Results in a lower total installation cost.
- Eliminates termination errors, Minimize install time
- Terminated with low loss 12 fiber MPO connectors
- Available in OS2, OM3, OM4 with LSZH sheath
- Available in lengths from 10mtrs up to 500mtrs
- Utilizes DINTEK MTX Reversible Connector
- Pull Tab Optional
Standards Compliance
- Low smoke (IEC 61034)
- Halogen free (IEC 60754-1)
- Fire retardant (IEC 60332-3)
- Corrosion resistant (IEC 60754-2)
- Compliant to TIA 604-5 and IEC 61754-7
- Standards ISO/IEC 11801 / EN 50173-1 / TIA-568C.0
- Data Center EN 50173-5 / ISO/IEC 24764/ TIA-942
- Ethernet IEEE 802.3; 10/40/100GbE
Advantages & Applications
- Factory-pre-terminated and certified giving maximum optical performance.
- Each cable is 100% tested for low insertion loss and back reflection
- Allows a smaller bending radius of the cable
- Cables are ready for deployment on arrival, which results in faster installation and less time spent on the job site.
- Installed with protection & pulling sleeves for crush-resistance
- DINTEK MTX Style Connector is a unique design. Its Polarity can be
changed without opening the housing or using any special tool. - RoHS and Reach Compliant.
Useful For Applications In
- Data center systems wiring
- Head-end termination to a fiber"backbone"
- Termination of fiber rack systems
- Multi-floor deployment & Intrabuilding "backbones"
| Connector Type And Tolerances | |
|---|---|
| Connector type | 12 fiber low loss MPO connector (reversible) |
| Typical Attenuation | -40 to +75°C |
| Return Loss | Return Loss ≥ 20dB |
| Operating Temp. | -40 to +75°C |
| Flammability | IEC 60332 Part 3 |
| Ordering Information | ||||
|---|---|---|---|---|
| Product Number | Product Name | Cores | Mode Type | Length |
2104-22003 | MPO Female to MPO Female (with MTX Reversible Connectors) | 48 | OS3 | 50m |
2104-22004 | MPO Female to MPO Female (with MTX Reversible Connectors) | 96 | OS3 | 50m |
2104-22007 | MPO Female to MPO Male (with MTX Reversible Connectors) | 48 | OS3 | 50m |
2104-22008 | MPO Female to MPO Male (with MTX Reversible Connectors) | 96 | OS3 | 50m |
2104-22068 | MTP / MPO Push-Pull Tab Housing | |||
| Features | ||
|---|---|---|
| ||
 |  |  |
 |  |  |
 |  |  |
| When KEY is black, it means polarity is normal | Pull Outer Housing back | Use a pen or finger nail to push KEY in |
 |  |  |
| Release Outer Housing. KEY is retracted position | MTX Connector Video Push Pull Tab Video | Turn Connector upside down |
 |  |  |
| Pull Outer Housing back | Use a pen or finger nail to push RED KEY out | When KEY is red, it means polarity is reversed |